DC Infrastructure

Filter Basic

TPS
Power range: 54-430 kW
Location:

Contact us for a price
In stock
22682,00 € 17012,00  (20244,28  inc tax) You save net: 5670,00 €
In stock
57995,00 € 43496,00  (51760,24  inc tax) You save net: 14499,00 €
In stock
187974,00 € 140981,00  (167767,39  inc tax) You save net: 46993,00 €
In stock
Airsys Unicool 7 kW direct free cooler with additional DX compressor cooling (type UNI.7V1T2 ) Including the equipment options Air filter / air filter protection PGD display Blygold coated registers Prevents corrosion Triples the useful life Saves up to 30% on...
Location:

6581,00 € 5923,00  (7048,37  inc tax) You save net: 658,00 €
In stock
Airsys Chillrow 28.7 kW - CW water-cooled (type CW25C1) Including filter sensor, floor water sensor, condensate pump, RS485 to TCP / IP converter Further equipment variants on request. The precision cooling units of the Airsys CHILLROW series offer precise and targeted cooling for...
Location:

5813,00  (6917,47  inc tax)
In stock
Set consisting of: 1x Airsys Chillrow 24 kW - DX compressor cooling (type 24V1C1.B ) 1x Airsys capacitor (type VMEG30V2) Filter sensor Soil water sensor Condensate pump RS485 to TCP / IP converter The precision cooling units of the Airsys...
Location:

Airsys Unicool 15 kW direct free cooler with additional DX compressor cooling (type UNI.15V1T4 ) Including the equipment options Air filter / air filter protection PGD display Blygold coated registers Prevents corrosion Triples the useful life Saves up to 30%...
Location:

9509,00  (11315,71  inc tax)
In stock
Airsys Unicool 11 kW direct free cooler with additional DX compressor cooling (type UNI.11V1B3 ) Including the equipment options Air filter / air filter protection PGD display Blygold coated registers Prevents corrosion Triples the useful life Saves up to 30%...
Location:

Airsys Chillrow 62.5 kW - CW water-cooled (type CW65C3) Including filter sensor, floor water sensor, condensate pump, RS485 to TCP / IP converter Further equipment variants on request. The precision cooling units of the Airsys CHILLROW series offer precise and targeted cooling for...
Location:

9157,00 € 7784,50  (9263,56  inc tax) You save net: 1372,50 €
In stock
Airsys Unicool 28 kW direct free cooler with additional DX compressor cooling (type UNI.28V2B5 ) Including the equipment options   Air filter / air filter protection PGD display Blygold coated registers Prevents corrosion Triples the useful life...
Location:

Airsys Chillrow 52.6 kW - CW water-cooled (type CW50C3) Including filter sensor, floor water sensor, condensate pump, RS485 to TCP / IP converter Further equipment variants on request. The precision cooling units of the Airsys CHILLROW series offer precise and targeted cooling for...
Location:

Set consisting of: 1x Airsys Chillrow 38 kW - DX compressor cooling (type DXA38V1C3 ) 1x Airsys capacitor (type VMEG40V2) Filter sensor Soil water sensor Condensate pump RS485 to TCP / IP converter Further equipment variants on request. The...
Location:

Airsys Unicool 15 kW direct free cooler with additional DX compressor cooling (type UNI.15V1B4 ) Including the equipment options Air filter / air filter protection PGD display Blygold coated registers Prevents corrosion Triples the useful life Saves up to 30%...
Location:

8224,00  (9786,56  inc tax)
In stock
Set consisting of: 1x Airsys Chillrow 12 kW - DX compressor cooling (type 12V1C1 ) 1x Airsys capacitor (type VMEG20V2) Filter sensor Soil water sensor Condensate pump RS485 to TCP / IP converter Further equipment variants on request. The...
Location:

9045,32  (10763,93  inc tax)
In stock
DA01-0021
With the fiber optic Uniboot duplex patch cable, short distances in protected indoor areas can be connected quickly and easily. The thin cables offer maximum flexibility with lower cable loads. Thanks to its bend-optimized fibers, it allows the smallest bending radii and thus increases the reliability. The LC Uniboot, assembled on both sides, offers simple connection options and the option of changing polarity without tools and without exposing the fibers.
Location:

delivery timeOn demand working days
21,63 € 18,98  (22,59  inc tax) You save net: 2,65 €
In stock
DB02-0062
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. By e ine integrated cable gland on the partitioning member, the pre-assembled trunks can be easily fixed in racks and patch and splice. The LC Uniboot, assembled on both sides, offers simple connection options and the option of changing polarity without tools and without exposing the fibers.
Location:

delivery timeOn demand working days
383,58 € 380,40  (452,68  inc tax) You save net: 3,18 €
In stock
DB02-0079
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. By e ine integrated cable gland on the partitioning member, the pre-assembled trunks can be easily fixed in racks and patch and splice. The LC Uniboot, assembled on both sides, offers simple connection options and the option of changing polarity without tools and without exposing the fibers.
Location:

delivery timeOn demand working days
775,02 € 736,27  (876,16  inc tax) You save net: 38,75 €
In stock
6J10-0005
The subrack offers space for 16 modules with a width of 5 HP, 12 modules with a width of 7 HP or 8 modules with a width of 10 HP. Each module can be individually equipped with the desired connector or coupling types. The subrack is also optionally available in 6U.
Location:

99,17 € 94,21  (112,11  inc tax) You save net: 4,96 €
In stock
6J51-0027
The fiber optic patch module is suitable for the 3U subrack. Equipped exclusively with LC quad couplings, it is suitable for accepting pre-assembled cables. Equipped with cable fingers on the back, the incoming cables can be safely routed and strain relieved.
Location:

Item conditionNew
32,04 € 30,44  (36,22  inc tax) You save net: 1,60 €
In stock
The LC patch box is suitable for installation in a 19 "rack. With the patch assembly you can effortlessly integrate your pre-assembled fiber optic cables into your network and thus save installation effort. They are suitable for up to 96 fibers on one height unit. A secure cable entry is made with the aid of cable glands.
Location:

delivery timeOn demand working days
90,19 € 85,66  (101,94  inc tax) You save net: 4,53 €
In stock
6Z93-0007
The trunk head support is designed for mounting on a subrack. It can be attached to the top and / or bottom of the subrack and is used to accommodate and strain relief for incoming cables. 9 recesses can be adjusted in size using clips in order to integrate M20, M25 or M32 screw connections.
Location:

21,62 € 20,53  (24,43  inc tax) You save net: 1,09 €
In stock
DX99-0011
The fiber optic patch cable MPO / MTP® - URM NG P8 is used to bridge short distances between active and passive distribution technology. The MPO / MTP® connectors standardized on the transceiver side are, in combination with the ferrule-based eight-fiber connector, suitable for future-oriented Base-8 cabling. Thanks to system-oriented connector combinations, they are application-independent and suitable for all Ethernet and   Fiber   Channel applications. Precisely fitting pre-assemblies with multi-fiber connectors minimize the installation time and cable load on site and make excess length storage unnecessary.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DX99-0007
FO fanout cables for network connections can be made available in different versions. Depending on your requirements, a 12-way, 16-way or 24-way MPO / MTP® connector with the corresponding number of individual whips, each with an LC Uniboot connector on the other side, is pre-assembled. System-oriented connector combinations are application-independent and suitable for all Ethernet and   Fiber   Channel applications. Precisely fitting pre-assemblies minimize the installation time and cable load on site and make excess length storage unnecessary.
Location:

105,01 € 99,76  (118,71  inc tax) You save net: 5,25 €
In stock
HRCC
Integrated precision air conditioning units for high-density applications and server rack cooling in cold water versions Type: HRCC With the HRCC, COOLtec offers you an ideal solution for the direct cooling of server racks in data centers. In addition, they are ideal for use in the...
Location:

Contact us for a price
In stock
NRG
Precision air conditioning cabinet with modulating BLDC compressors for maximum flexibility and energy efficiency Type: NRG - air cooled with an external condenser Advantages: Modulating performance with BLDC compressor Energy efficiency High quality equipment Possible air...
Location:

Contact us for a price
In stock
ZETA SKY R7
Swegon - air-cooled water chiller w. Inverter scroll compressor and R32 refrigerant Type: ZETA SKY Hi R7 Cooling capacity: 30 ÷ 120 kW Air-cooled water chiller with brushless inverter scroll compressor and plate heat exchanger for outdoor installation. The ZETA SKY Hi R7 series is...
Location:

delivery timeOn demand working days
Contact us for a price
On backorder
DA01-0043
With the fiber optic Uniboot duplex patch cable, short distances in protected indoor areas can be connected quickly and easily. The thin cables offer maximum flexibility with lower cable loads. Thanks to its bend-optimized fibers, it allows the smallest bending radii and thus increases the reliability. The URM NG P2, assembled on both sides, is convincing as a duplex connector of the URM family, which is particularly characterized by its easy handling and migration to Base-8 cabling. With the plug-in compatible URM NG P8, multi-fiber systems can be easily integrated.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DB01-0064
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. The pre-assembled trunks can be easily fixed in subracks as well as patch and splice boxes using an integrated cable screw connection on the partitioning element. The ferrule-based URM NG P8 connector, assembled on both sides, offers simple connection options and is perfectly suited for future-oriented Base-8 cabling.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DB01-0063
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. The pre-assembled trunks can be easily fixed in subracks as well as patch and splice boxes using an integrated cable screw connection on the partitioning element. The ferrule-based URM NG P8 connector, assembled on both sides, offers simple connection options and is perfectly suited for future-oriented Base-8 cabling.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
FIT-FCSW-KIT1-NW
FiberChek Sidewinder™ - Automated multifiber connector inspection and analysis
Location:

Arbachtalstraße 5, 72800 Eningen unter Achalm, Deutschland

3690,00  (4391,10  inc tax)
On backorder
DA01-0042
LWL-Uniboot duplex patch cable LC-URM NG P2 With the duplex cable it is possible for you as a user to connect your active devices and distribution technology over short distances in the protected interior area. The lower cable load means that more cables can be traded in the same space....
Location:

delivery timeOn demand working days
Contact us for a price
In stock
ZETA SKY R7
Swegon - air-cooled water chiller with R32 refrigerant for outdoor installation Type: ZETA SKY R7 Cooling capacity: 40 ÷ 240 kW Air-cooled chiller with hermetic scroll compressors and plate heat exchanger for outdoor installation. The machine is characterized by its particular...
Location:

delivery timeOn demand working days
Contact us for a price
On backorder
DX99-0032
FO fanout cables for network connections can be made available in different versions. Depending on your requirements, a 12-way, 16-way or 24-way MPO / MTP® connector with the corresponding number of individual legs with one URM NG P2 connector on the other side is pre-assembled System-oriented connector combinations are application-independent and suitable for all Ethernet and Fiber Channel applications. Precisely fitting pre-assemblies minimize the installation time and cable load on site and make excess length storage unnecessary.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
Coolblade DX FJ
Swegon - InRow cooling systems for IT applications with Fujitsu outdoor units Type: COOLBLADE BTD DX FJ + Fujitsu outdoor unit AOYG Cooling capacity: 12.5 ÷ 24.4 kW 1 The applications in data centers and data rooms require a high cooling capacity with a small footprint. COOLBLADE...
Location:

delivery timeOn demand working days
Contact us for a price
On backorder
Coolblade BTD CW
Swegon - InRow cooling systems for IT applications for connection to a cold water network Type: COOLBLADE BTD CW Cooling capacity: 16.5 ÷ 35.4 kW 1 The applications in data centers and data rooms require a high cooling capacity with a small footprint. COOLBLADE BTD systems are...
Location:

delivery timeOn demand working days
Contact us for a price
On backorder
JREF
Precision air conditioning cabinet with small display areas for small to medium power requirements Type: JREF with external condenser Possible air ducts: Downflow (D) - blowing down Upflow (U) - blowing upwards Displacement (X) - blowing out to the front and to the side Basic...
Location:

Contact us for a price
In stock
Fan-supported double floor plate . Suitable for the usual double floor 600 x 600 mm grid Targeted air supply to underserved areas Up to 4700 m³ / h air supply Control according to pressure or temperature Energy efficient EC fan
Location:

Contact us for a price
On backorder
OMICRON REV S4
Swegon - Air-cooled multi-function unit for 4-pipe system for heating and cooling Type: OMICRON REV S4 Cooling capacity: 40 ÷ 850 kW Highly efficient modular air-cooled multifunctional unit for 4-pipe system for outdoor installation for the simultaneous and independent...
Location:

delivery timeOn demand working days
Contact us for a price
On backorder
Water-cooled double floor plate for heat dissipation in data centers. Suitable for the usual double floor 600 x 600 mm grid 10 KW power per plate Can be installed in all standard double floors Suitable for new data centers or for retrofitting in existing data centers Laying...
Location:

Contact us for a price
On backorder
 Optima INV DXA 20V1A1+ 1 x AMAE8   The OPTIMA product family from Airsys was specially developed for use in small, medium and large data centers as well as for process and clean room applications. OPTIMA devices combine precise temperature and humidity control with outstanding reliability....
Location:

Contact us for a price
In stock
 Optima INV DXA 90V2A4 + 2xAMAE18   The OPTIMA product family from Airsys was specially developed for use in small, medium and large data centers as well as for process and clean room applications. OPTIMA devices combine precise temperature and humidity control with outstanding reliability....
Location:

Contact us for a price
In stock
 Optima INV DXA 70V2A4 + 2 x AMAE12   The OPTIMA product family from Airsys was specially developed for use in small, medium and large data centers as well as for process and clean room applications. OPTIMA devices combine precise temperature and humidity control with outstanding...
Location:

Contact us for a price
In stock
 Optima INV DXA 60V2A4 + 2 xAMAE10   The OPTIMA product family from Airsys was specially developed for use in small, medium and large data centers as well as for process and clean room applications. OPTIMA devices combine precise temperature and humidity control with outstanding...
Location:

Contact us for a price
In stock
 Optima INV DXA 55V2A3 + 2 x AMAE8 (high eff. = EC fan)   The OPTIMA product family from Airsys was specially developed for use in small, medium and large data centers as well as for process and clean room applications. OPTIMA devices combine precise temperature and humidity control with...
Location:

Contact us for a price
In stock
 Optima INV DXA 80V2A4 + 2xAMAE15   The OPTIMA product family from Airsys was specially developed for use in small, medium and large data centers as well as for process and clean room applications. OPTIMA devices combine precise temperature and humidity control with outstanding reliability....
Location:

Contact us for a price
In stock
 Optima INV DXA 30V1A2 + 1 x AMAE10   The OPTIMA product family from Airsys was specially developed for use in small, medium and large data centers as well as for process and clean room applications. OPTIMA devices combine precise temperature and humidity control with outstanding...
Location:

Contact us for a price
In stock
 Optima INV DXA 35V2A3 + 2 x AMAE 6   The OPTIMA product family from Airsys was specially developed for use in small, medium and large data centers as well as for process and clean room applications. OPTIMA devices combine precise temperature and humidity control with outstanding...
Location:

Contact us for a price
In stock
5,58  (6,64  inc tax)
In stock