Notice The following required product(s) were added to your cart
3U subrack

LWL-Sachsenkabel GmbH

Vendor products Products found: 17

DA01-0021
With the fiber optic Uniboot duplex patch cable, short distances in protected indoor areas can be connected quickly and easily. The thin cables offer maximum flexibility with lower cable loads. Thanks to its bend-optimized fibers, it allows the smallest bending radii and thus increases the reliability. The LC Uniboot, assembled on both sides, offers simple connection options and the option of changing polarity without tools and without exposing the fibers.
Location:

delivery timeOn demand working days
21,63 € 18,98  (22,59  inc tax) You save net: 2,65 €
In stock
DB02-0062
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. By e ine integrated cable gland on the partitioning member, the pre-assembled trunks can be easily fixed in racks and patch and splice. The LC Uniboot, assembled on both sides, offers simple connection options and the option of changing polarity without tools and without exposing the fibers.
Location:

delivery timeOn demand working days
383,58 € 380,40  (452,68  inc tax) You save net: 3,18 €
In stock
DB02-0079
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. By e ine integrated cable gland on the partitioning member, the pre-assembled trunks can be easily fixed in racks and patch and splice. The LC Uniboot, assembled on both sides, offers simple connection options and the option of changing polarity without tools and without exposing the fibers.
Location:

delivery timeOn demand working days
775,02 € 736,27  (876,16  inc tax) You save net: 38,75 €
In stock
6J10-0005
The subrack offers space for 16 modules with a width of 5 HP, 12 modules with a width of 7 HP or 8 modules with a width of 10 HP. Each module can be individually equipped with the desired connector or coupling types. The subrack is also optionally available in 6U.
Location:

99,17 € 94,21  (112,11  inc tax) You save net: 4,96 €
In stock
6J51-0027
The fiber optic patch module is suitable for the 3U subrack. Equipped exclusively with LC quad couplings, it is suitable for accepting pre-assembled cables. Equipped with cable fingers on the back, the incoming cables can be safely routed and strain relieved.
Location:

Item conditionNew
32,04 € 30,44  (36,22  inc tax) You save net: 1,60 €
In stock
The LC patch box is suitable for installation in a 19 "rack. With the patch assembly you can effortlessly integrate your pre-assembled fiber optic cables into your network and thus save installation effort. They are suitable for up to 96 fibers on one height unit. A secure cable entry is made with the aid of cable glands.
Location:

delivery timeOn demand working days
90,19 € 85,66  (101,94  inc tax) You save net: 4,53 €
In stock
6Z93-0007
The trunk head support is designed for mounting on a subrack. It can be attached to the top and / or bottom of the subrack and is used to accommodate and strain relief for incoming cables. 9 recesses can be adjusted in size using clips in order to integrate M20, M25 or M32 screw connections.
Location:

21,62 € 20,53  (24,43  inc tax) You save net: 1,09 €
In stock
DX99-0011
The fiber optic patch cable MPO / MTP® - URM NG P8 is used to bridge short distances between active and passive distribution technology. The MPO / MTP® connectors standardized on the transceiver side are, in combination with the ferrule-based eight-fiber connector, suitable for future-oriented Base-8 cabling. Thanks to system-oriented connector combinations, they are application-independent and suitable for all Ethernet and   Fiber   Channel applications. Precisely fitting pre-assemblies with multi-fiber connectors minimize the installation time and cable load on site and make excess length storage unnecessary.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DX99-0007
FO fanout cables for network connections can be made available in different versions. Depending on your requirements, a 12-way, 16-way or 24-way MPO / MTP® connector with the corresponding number of individual whips, each with an LC Uniboot connector on the other side, is pre-assembled. System-oriented connector combinations are application-independent and suitable for all Ethernet and   Fiber   Channel applications. Precisely fitting pre-assemblies minimize the installation time and cable load on site and make excess length storage unnecessary.
Location:

105,01 € 99,76  (118,71  inc tax) You save net: 5,25 €
In stock
DA01-0043
With the fiber optic Uniboot duplex patch cable, short distances in protected indoor areas can be connected quickly and easily. The thin cables offer maximum flexibility with lower cable loads. Thanks to its bend-optimized fibers, it allows the smallest bending radii and thus increases the reliability. The URM NG P2, assembled on both sides, is convincing as a duplex connector of the URM family, which is particularly characterized by its easy handling and migration to Base-8 cabling. With the plug-in compatible URM NG P8, multi-fiber systems can be easily integrated.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DB01-0064
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. The pre-assembled trunks can be easily fixed in subracks as well as patch and splice boxes using an integrated cable screw connection on the partitioning element. The ferrule-based URM NG P8 connector, assembled on both sides, offers simple connection options and is perfectly suited for future-oriented Base-8 cabling.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DA01-0042
LWL-Uniboot duplex patch cable LC-URM NG P2 With the duplex cable it is possible for you as a user to connect your active devices and distribution technology over short distances in the protected interior area. The lower cable load means that more cables can be traded in the same space....
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DB01-0063
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. The pre-assembled trunks can be easily fixed in subracks as well as patch and splice boxes using an integrated cable screw connection on the partitioning element. The ferrule-based URM NG P8 connector, assembled on both sides, offers simple connection options and is perfectly suited for future-oriented Base-8 cabling.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DX99-0032
FO fanout cables for network connections can be made available in different versions. Depending on your requirements, a 12-way, 16-way or 24-way MPO / MTP® connector with the corresponding number of individual legs with one URM NG P2 connector on the other side is pre-assembled System-oriented connector combinations are application-independent and suitable for all Ethernet and Fiber Channel applications. Precisely fitting pre-assemblies minimize the installation time and cable load on site and make excess length storage unnecessary.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
6J32-0201
The fiber optic splice module is suitable for the 3U subrack and is used to integrate non-assembled cables into the network. Equipped with up to 24 pre-assembled pigtails and a splice cassette, it offers an uncomplicated option for cable installation.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
6J62-0010
The fiber optic splice module is suitable for the 3U subrack and is used for integration   unassembled   Cable into the network. Equipped with 24 pre-assembled   Pigtails   and one   Splice tray   it offers an uncomplicated option for cable installation.
Location:

delivery timeOn demand working days
161,11 € 153,05  (182,13  inc tax) You save net: 8,06 €
In stock
6J51-0015
The fiber optic patch module is suitable for the 3U subrack. Equipped exclusively with URM K8 couplings, it is suitable for accepting pre-assembled cables. Equipped with cable fingers on the back, the incoming cables can be safely routed and strain relieved.
Location:

delivery timeOn demand working days
Contact us for a price
In stock

Presentations

Firmenpräsentation
Download
RZ Broschüre
Download

Certificates & References

Iso 9001
Download

Products with documents Products found: 12

DA01-0021
With the fiber optic Uniboot duplex patch cable, short distances in protected indoor areas can be connected quickly and easily. The thin cables offer maximum flexibility with lower cable loads. Thanks to its bend-optimized fibers, it allows the smallest bending radii and thus increases the reliability. The LC Uniboot, assembled on both sides, offers simple connection options and the option of changing polarity without tools and without exposing the fibers.
Location:

delivery timeOn demand working days
21,63 € 18,98  (22,59  inc tax) You save net: 2,65 €
In stock
DB02-0062
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. By e ine integrated cable gland on the partitioning member, the pre-assembled trunks can be easily fixed in racks and patch and splice. The LC Uniboot, assembled on both sides, offers simple connection options and the option of changing polarity without tools and without exposing the fibers.
Location:

delivery timeOn demand working days
383,58 € 380,40  (452,68  inc tax) You save net: 3,18 €
In stock
DB02-0079
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. By e ine integrated cable gland on the partitioning member, the pre-assembled trunks can be easily fixed in racks and patch and splice. The LC Uniboot, assembled on both sides, offers simple connection options and the option of changing polarity without tools and without exposing the fibers.
Location:

delivery timeOn demand working days
775,02 € 736,27  (876,16  inc tax) You save net: 38,75 €
In stock
6J10-0005
The subrack offers space for 16 modules with a width of 5 HP, 12 modules with a width of 7 HP or 8 modules with a width of 10 HP. Each module can be individually equipped with the desired connector or coupling types. The subrack is also optionally available in 6U.
Location:

99,17 € 94,21  (112,11  inc tax) You save net: 4,96 €
In stock
6J51-0027
The fiber optic patch module is suitable for the 3U subrack. Equipped exclusively with LC quad couplings, it is suitable for accepting pre-assembled cables. Equipped with cable fingers on the back, the incoming cables can be safely routed and strain relieved.
Location:

Item conditionNew
32,04 € 30,44  (36,22  inc tax) You save net: 1,60 €
In stock
The LC patch box is suitable for installation in a 19 "rack. With the patch assembly you can effortlessly integrate your pre-assembled fiber optic cables into your network and thus save installation effort. They are suitable for up to 96 fibers on one height unit. A secure cable entry is made with the aid of cable glands.
Location:

delivery timeOn demand working days
90,19 € 85,66  (101,94  inc tax) You save net: 4,53 €
In stock
6Z93-0007
The trunk head support is designed for mounting on a subrack. It can be attached to the top and / or bottom of the subrack and is used to accommodate and strain relief for incoming cables. 9 recesses can be adjusted in size using clips in order to integrate M20, M25 or M32 screw connections.
Location:

21,62 € 20,53  (24,43  inc tax) You save net: 1,09 €
In stock
DA01-0043
With the fiber optic Uniboot duplex patch cable, short distances in protected indoor areas can be connected quickly and easily. The thin cables offer maximum flexibility with lower cable loads. Thanks to its bend-optimized fibers, it allows the smallest bending radii and thus increases the reliability. The URM NG P2, assembled on both sides, is convincing as a duplex connector of the URM family, which is particularly characterized by its easy handling and migration to Base-8 cabling. With the plug-in compatible URM NG P8, multi-fiber systems can be easily integrated.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DB01-0064
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. The pre-assembled trunks can be easily fixed in subracks as well as patch and splice boxes using an integrated cable screw connection on the partitioning element. The ferrule-based URM NG P8 connector, assembled on both sides, offers simple connection options and is perfectly suited for future-oriented Base-8 cabling.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DA01-0042
LWL-Uniboot duplex patch cable LC-URM NG P2 With the duplex cable it is possible for you as a user to connect your active devices and distribution technology over short distances in the protected interior area. The lower cable load means that more cables can be traded in the same space....
Location:

delivery timeOn demand working days
Contact us for a price
In stock
DB01-0063
The fiber optic trunk cable is used for permanent cabling between network cabinets. Precisely fitting pre-assemblies minimize the installation time on site and make excess length storage unnecessary. The pre-assembled trunks can be easily fixed in subracks as well as patch and splice boxes using an integrated cable screw connection on the partitioning element. The ferrule-based URM NG P8 connector, assembled on both sides, offers simple connection options and is perfectly suited for future-oriented Base-8 cabling.
Location:

delivery timeOn demand working days
Contact us for a price
In stock
6J32-0201
The fiber optic splice module is suitable for the 3U subrack and is used to integrate non-assembled cables into the network. Equipped with up to 24 pre-assembled pigtails and a splice cassette, it offers an uncomplicated option for cable installation.
Location:

delivery timeOn demand working days
Contact us for a price
In stock

News

LWL-Sachsenkabel GmbH bietet seit über 15 Jahren passive Rechenzentrumsinfrastrukturen in höchster Qualität. Als ganzheitlicher Lösungsanbieter...
Mehrfaserbasierte Verkabelungssysteme mit MDC-Steckverbindern LWL-Sachsenkabel ergänzte sein Portfolio mehrfaserbasierter Verkabelungssysteme...

LWL-Sachsenkabel GmbH

Hauptstraße 110
Gornsdorf
09390
Ask a question
0
%
Criteria Average rating Count of ratings
How reliable is the vendor?
How is the communicatin with the vendor?
How transparent is the vendor?
How fair is the vendor?

No posts found